CNB SSM2065PW - Manual (Page 14)

Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 27
▣ Zoom Camera Setup
„ White Balance Setup
4. MENU
Setup the general functions of zoom camera module.
z FOCUS MODE [AUTO/MANUAL/SEMIAUTO]
Sets camera focus mode.
{ SEMIAUTO Mode
This mode exchanges focus mode
automatically between Manual Focus mode
and Auto Focus mode. Manual Focus mode
activates in preset operation and Auto Focus
mode activates when jog operation starts.
With Manual mode at presets, Focus data is
memorized in each preset in advance and
camera calls focus data in correspondence
with presets as soon as camera arrives at a
preset.
z DIGITAL ZOOM [ON/OFF]
Sets digital zoom function to ON/OFF. If this is
set to OFF, optical zoom function runs but zoom
function stops at the end of optical zoom
magnification.
z LINE LOCK [ON/OFF]
If Line lock sync is ON, video signal is
synchronized with AC power. Video can be
fluctuated after setting is changed.
z IMAGE FLIP [ON/OFF]
If IMAGE FLIP is ON, Current image is
reversed. If IMAGE FLIP is OFF, Reversed
image will recover to previous status.
z WB MODE [AUTO/MANUAL]
In Manual mode, Red and Blue level can be set
up manually
z RED ADJUST [10~60]
z BLUE ADJUST [10~60]
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 28
„ Auto Exposure Setup
4. MENU
z BACKLIGHT [ON/OFF]
Sets Backlight Compensation
z DAY/NIGHT [AUTO1/AUTO2(0~255)/DAY/NIGHT]
AUTO1 exchanges Day/Night mode faster than AUTO2.
You are able to adjust Day/Night sensitive level if you
have selected AUTO2 mode. If Day&Night sensitive level
has the higher value, it excute that change Day&Night in
the lower luminance.
z BRIGHTNESS [0~100]
Adjusts brightness of images. Iris, Shutter Speed and
Gain are adjusted automatically in correspondence with
this value.
z IRIS [AUTO/MANUAL(0~100)]
If Iris is set to Auto, Iris should have highest priority in
adjusting AE and Shutter Speed should be fixed.
If Iris is set to Manual, Iris should be fixed and Iris has
lower priority in adjusting AE, in comparison with
others.
z SHUTTER [ESC/A.FLICKER/MANUAL]
If Iris is set to Manual and Shutter Speed is set to ESC,
Shutter Speed should have highest priority. If Shutter
Speed is set to A.Flicker, to remove Flicker, Shutter
Speed should be set to 1/100 sec. for NTSC and 1/120
for PAL. If Shutter Mode is set to MANUAL, Shutter speed
is able to adjust from x128 to 1/120000.
z AGC [OFF/NORMAL/HIGH]
Enhances image brightness automatically in case that
luminance level of image signal is too low.
z SSNR [OFF/LOW/MIDDLE/HIGH]
Enhances images by deducting noises when gain level
of images is too high.
z SENS-UP [AUTO(2~128)/OFF]
Activates Slow Shutter function when luminance
of image (signal) is too dark.
It is possible to set up the maximum number of frames
piled up one on another by Slow Shutter function.