CNB SSM2065PW - Manual (Page 12)

Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 23
▣ OSD Display of Main Screen
z P/T/Z Information Current Pan/Tilt angle in degree, zoom magnification and a compass direction.
z Camera ID Current Camera ID(Address).
Followings are possible Action Titles and their meaning.
"SET PRESET ×××" When Preset ××× is stored
"PRESET ×××" When camera reach to Preset ×××
"PATTERN ×" When Pattern × is in action
"SWG×/PRESET ×××" When Swing × is in action
z Action Title
"UNDEFINED" When undefined function is called to run
z Preset Label The Label stored for specific Preset.
z Alarm Input This information shows current state of input and relay output.
If the input and output points are ON state it will show a number corresponding
to each point. When they are OFF state, ‘-‘ will be displayed.
Ex) Point 2 & 3 of inputs are 1 of output is ON, OSD will show as below
z Image Flip Shows that images are currently reversed by Auto Flip Function.
3. OPERATION 3. OPERATION
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 24
▣ General Rules of Key Operation for Menu
z The menu items surrounded with < > always has its sub menu.
z For all menu level, to go into sub menu, press NEAR key.
z To go to up-one-level menu, press FAR key.
z To move from items to item in the menu, use joystick in the UP/DOWN or LEFT/RGHT.
z To change a value of an item, use UP/DOWN of the joystick in the controller.
z Press NEAR key to save values and Press FAR key to cancel values.
▣ Main Menu
4. MENU
z SYSTEM INFORMATION Displays system information and
configuration.
z DISPLAY SETUP Enable/Disable of OSD display on Main
Screen.
z DOME CAMERA SETUP Configure various functions of this camera.
z SYSTEM INITIALIZE Initializes system configuration and sets all
data to factory default configuration.