CNB SSM2065PW - Manual (Page 4)

Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 7
▣ Product & Accessories
„ Basic Components
Camera Bracket & Bracket Accessories
„ Other Components (available to be ordered separately)
1. INTRODUCTION
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 8
▣ Parts Name & Functions
① Dome Cover Do not detach protection vinyl from dome cover before finishing all
installation process to protect dome cover from scratches or dust.
② DIP Switch Sets up camera ID and protocol.
③ Main Body Cable Enables signals and power to come and go between main body and mount
bracket.
④ Drop Prevention Spring This part keeps the camera from dropping during installation and
maintenance. After install the Bracket, please, hang the spring to the drop
prevention hook of main body as shown in picture for further tasks.
⑤ Fuse If the fuse is burnt to protect your came from over-current damage, the fuse
have to be replace with new one. The fuse specification is 250V, 2A.
However, we recommend consulting with supplier to remove the cause of
over-current.
⑥ Lockup Screw After assembling main body to bracket, screw main body to bracket to
protect them from separation by vibration and so on.
⑦ Cablling Terminal Block During installation, Power, Video, Ciommunication, Alarm I/O cables are
connected on to this cabling terminal block.
⑧ Mold Line Mark to assemble main body to bracket.
1. INTRODUCTION