CNB SSM2065PW - Manual (Page 16)

Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 31
▣ Preset Setup
4. MENU
z PRESET NO. [1~128]
If a selected preset is already defined, camera
moves to pre-defined position and preset
characteristics such as Label and Relay Outputs
show on monitor. If a selected preset is not
defined, “UNDEFINED” shows on monitor.
z CLR PRESET [CANCEL/OK]
Delete current Preset data
z EDIT SCENE Redefine current Preset scene position (i.e. PTZ).
z EDIT LABEL Edits Label to show on monitor when preset runs.
MAX. 10 alphabets are allowed.
z RELAY OUT [ON/OFF]
Sets the relay output for each preset.
z CAM ADJUST [GLOBAL/LOCAL]
WB(White Balance) and AE(Auto Exposure) can
be set up independently for each preset. There
are 2 modes, "Global" mode & "Local" mode. The
Global mode means that WB or AE can be set up
totally and simultaneously for all presets in
"ZOOM CAMERA SETUP" menu.
The Local mode means that WB or AE can be set
up independently or separately for each preset
in each preset setup menu. Each Local WB/AE
value should activate correspondingly when
camera arrives at each preset location. During
jog operation, Global WB/AE value should be
applied.
All Local WB/AE value should not change
although Global WB/AE value changes. If “Local’’
Xpeed Mini Outdoor Speed Dome Camera Series
www.cnbtec.com 32
„ Edit Preset Scene
„ Edit Preset Label
4. MENU
○ 1 Using Joystick, move camera to desired position.
○ 2 By pressing NEAR key, save current PTZ data.
○ 3 Press FAR key to cancel.
① Edits label to show on monitor when camera arrives at presets. In
Edit Label menu, a reverse rectangular is cursor. As soon as
finishing selecting alphabet, cursor moves to the next digit.
② Using LEFT/RIGHT/UP/DOWN of joystick, move to an
appropriate character from the Character set. To choose that
character, press the NEAR key.
If you want to use blank, choose Space character (" "). If you want to
delete a character before, use back space character (" ←").
③ If you complete the Label editing, move cursor to "OK" and press
NEAR key to save completed label. To abort current change, move
cursor to "Cancel" and press NEAR key.