Kolpin 86360 - ATV SPREADER - Manual (Page 3)

SPECIFIC SAFETY RULES
1- Always wear protective clothing, eyewear, and dust mask to prevent contact with chemical and other
materials being applied with this machine.
2- Remove any material in hopper before lifting or detaching this machine from the vehicle.
3- Care must be taken when lifting this machine so as not to cause personal injury or equipment
damage. Never attempt to install this machine to the vehicle alone. Recruit the help of someone to
assist when attaching and detaching this machine from the vehicle.
4- Refer to the material packaging or the Material Safety Data Sheet for precautionary measures
required when handling materials to be applied.
5- Before attaching this machine, consideration must be given to the load capacity of the vehicle. Refer
to the owner’s manual of the vehicle for rated load capacity. Be sure to take into account the weight
of this machine 20lbs and the weight of the material to be placed in the hopper when calculating the
total load.
6- Keep hangs away from any spinning object.
HOW TO OPERATE SAFETY
1- Read, understand, and follow all product label information provided on the material being applied.
2- An adjustable solid stop is provided that allows the operator to adjust to the desired opening position
on the rate setting control prior to operation of the vehicle. This allows repeatability to the stop
without the need to look at the control while operation the vehicle.
3- Establish the correct rate and then lock the stop in that position using the thumb wing nut on the
setting control.
PRODUCT SPECIFICATIONS
1- 12 Volt motor with vinyl coating mounts to front or rear luggage rack, lever and gauge mounts to
either side.
2- Fits most brands of ATVs and comes with wiring harness for easy installation.
3- Heavy 80-Lb load bearing capacity.
4- Capacity:1900 cu.in.