Hach-Lange ORBISPHERE 6110 User Manual - Manual (Page 45)

43
Configuration
5.7 Scheduled operations
This option defines the sensor service and calibration schedule for all the sensors installed on
the instrument.
5.7.1 Manual calibration
5.7.2 Verification
The process is the same as for Manual calibration but defines a verification frequency for
selected sensors.
5.7.3 Routine maintenance
The process is the same as for Manual calibration but defines a service frequency for selected
instrument maintenance options.
5.7.4 Service
The process is the same as for Manual calibration but defines a service frequency for selected
instrument service options.
Manual calibration
Select a sensor and check the activation flag as required.
Calibration
frequency When set, the system will set a yellow status indicator message to inform you when a
sensor calibration is required (see also
Instrument status indicator on page 29 ).
Frequency
selection Press the button to set the desired frequency:
•
Choose between Daily, Weekly, Monthly or Yearly by pressing the appropriate
radio button
• With the Weekly option, define the day of the week when the operation will take
place
• With the Monthly option, define:
•
The date and monthly interval (e.g. every 15th day of every 3 months), or
• The day and monthly interval (e.g. every 1st Sunday of every 2 months)
• With the Yearly option, define:
•
The date and month (e.g. every 1st February), or
• The day and month (e.g. every 2nd Saturday of every July)