Hach-Lange SI792(x) E HACH GLI 3700 series SI792(x) T 7MA2200 and 8398 series User Manual - Manual (Page 85)

Troubleshooting
83
Specify output
current
From the measuring mode, press CONF and enter passcode
‘5555’. The measured current will show in the secondary
display. The output current in the main display can be
modified.
To change the output current:
1. Select the current value with the
RIGHT ARROW key.
2. Edit the number using the UP ARROW key.
3. Press ENTER to confirm. The entered value will show in
the secondary display. The transmitter will remain in Hold
mode.
4. To exit Hold mode, press CONF , then ENTER to return to
measuring mode.
10.4 Diagnostic tests (continued)
Function Description