Hach-Lange SI792(x) E HACH GLI 3700 series SI792(x) T 7MA2200 and 8398 series User Manual - Manual (Page 33)

31
Section 4 Interface and navigation
The si792 transmitter user interface contains a display, indicators and
keys for navigation and menu selection.
4.1 si792(x) E/T (4–20 mA/HART) interface
Use the arrow and enter keys to scroll through the menu and change
settings. Use the indicators to identify which mode the transmitter is in.
Refer to
Figure 9 to identify the keys and indicators of the si792(x) E/T
transmitter.
Figure 9 User interface—si792(x) E/T transmitter
1 Calibration key 7 Wash mode indicator (not available)
2 Configure key 8 Configuration mode indicator
3 Measure mode indicator 9 Up arrow key
4 Calibration mode indicator 10 Right arrow key
5 Alarm indicator
11 Enter key
6 Display