Clear-Com RS-603 (No longer available) - Manual (Page 30)

2 8
R S - 6 0 3 / 6 2 3 / R B E L T P A C K S
feature is useful for programming many beltpacks with the same
settings. And V-Pack includes many more features you can program
for your beltpack.
To operate the V-Pack software, you must first install it on a computer,
then connect the VPC-1 cable to both a beltpack and to your
computer.
For more detailed instructions on using the software, see the V-Pack
manual or on-line help files. You can access the manual from the
Clear-Com Web site. A VPC-1 installation kit, which includes a
factory CD containing the V-Pack software, a computer cable, and a
printed V-Pack manual is available for purchase through your dealer
or directly from Clear-Com.
ONBOARD PROGRAMMING
With onboard programming, you customize the operation of your
beltpack using the controls on the beltpack itself.
When you receive your beltpack, it already contains the default
settings that will meet the needs of most users. You do not need to
program it unless you want to.
However, if you wish to change the settings to better meet your needs,
you can do so with onboard programming. The beltpack remembers
your new settings until you change them again.