Clear-Com RS-603 (No longer available) - Manual (Page 12)

1 0 R S - 6 0 3 / 6 2 3 / R B E L T P A C K S
Talk Lights, Channels A and B
A channel’s green talk light illuminates when you press or latch that
channel’s talk button.
Some onboard programming options can change the function of this
light. For more information about onboard programming, refer to
“Customizing Your Beltpack” later in this manual
Talk Buttons, Channels A and B
To talk on an intercom channel, press and hold that channel’s talk
button while speaking into the microphone in your headset. While
you hold the button, your voice transmits to the intercom channel.
When you release the button, your voice no longer transmits to the
intercom channel.
To “latch” a talk button “on” for hands-free use, quickly tap the
button twice. To unlatch the talk button, press the button again.
With the V-Pack programming software, you can program a talk
button to latch with a single or double tap, or not to latch at all. See
“Customizing Your Beltpack” for more information.
Call Lights, Channels A and B
A channel’s call light illuminates when you send or receive a call signal
on that channel.
1
2
3