Clear-Com RS-603 (No longer available) - Manual (Page 14)

1 2 R S - 6 0 3 / 6 2 3 / R B E L T P A C K S
Volume-Control Knob, Channel B
The volume-control knob for channel B adjusts the incoming volume
level (“listen level”) for that channel
There is a limiter built into the beltpack circuitry to prevent incoming
volume from exceeding a safe level. You can suspend this limit with
the V-Pack software.
Power Status Light
An illuminated power status light indicates that the beltpack is
connected to a powered intercom line.
Note: The light may illuminate even if the beltpack is receiving less
than the minimum 12 VDC required for beltpack operation.
6
7