Burkert Type S039 - Manual (Page 12)

ENGLISH ENGLISH
flow rate controller 8039
4 installation
4.1 General recommendations
- Always check the chemical compatibility of the materials the controller
is made of with the products it may be in contact with, for instance:
alcohols, strong or concentrated acids, aldehydes, bases, esters,
aliphatics, aromatics, ketones, aromatics or halogenated hydrocarbons,
oxidizing agents and chlorinated products.
- Avoid installing the controller near industrial lighting which may disturb
the optical sensor (mercury halide lamps for example).
For more information, please contact your Bürkert sales office.
4.2 mounting on the pipe
The controller 8039 includes an S039 fitting for installation on a pipe.
Install the 8039 on the pipe so that the arrow on the housing indicates
the direction of the flow.
SE39
S039
1
2
3