Burkert Type 8643 - Manual (Page 32)

32 - 8643
english
7.2.5 description of some of the parameters
of the transducer block (dI)
parameter description
CALIB_DI_11…18 0x10 key input OFF, line fault detection ON 1)
0x11 key input ON, line fault detection ON 1)
0x80 key input OFF, line fault detection OFF
0x81 key input ON
2) , line fault detection OFF
1) sets the „fault detection“ for the LED module
2) for key input ON, the received impulse must
be at least 200 ms
SENSOR_MAN_
11…18 Name of the sensor manufacturer
SENSOR_SER_NUM_
11…18 Serial number of the sensor belonging to the
device
SENSOR_ID_11…18 Sensor identification
8 commIssIonInG
Before commissioning the Power I/O Box Type 8643 with FOUNDATION
Fieldbus activation, make sure that:
the unit has been properly connected, →
the Power I/O Box has been installed according to the instructions →
the Power I/O Box is not damaged. →