Burkert Type 8643 - Manual (Page 31)

8643 - 31
english
7.2.3 description of some of the block parameters
of the transducer block (do)
parameter description
CALIB_DO_OUT_5…8 0x10 line default detection ON
0x80 line default detection OFF
(Sets the „fault detection“ for the LED module)
ACTUATOR_MAN_
5…8 Name of actuator manufacturer
ACTUATOR_SER_
NUM_5…8 Actuator serial number
ACTUATOR_ID_5…8 Actuator identification
vALvE_MAN_5…8 Name of valve manufacturer
vALvE_SER_NUM_
5…8 valve serial number
vALvE_ID_5…8 valve identifier
If a fault is detected at the output, MANUAL mode commences (MAN).
7.2.4 description of a parameter of the function block (dI)
Parameter Description
CHANNEL There are channels 11-18.
The input may not be occupied with a DO_
valve_TB.
If channel 100 is entered, the inputs and /or
outputs will not be occupied.