Burkert Type 6144 - Manual (Page 9)

9
07 ATEX 2048
English
General technical data
6.2. Conformity
In accordance with the EC Declaration of conformity, Type 6144 is
compliant with the EC Directives.
6.3. Standards
The applied standards, which verify conformity with the EC Direc-
tives, can be found on the EC-Type Examination Certificate and / or
the EC Declaration of Conformity.
6.4. Identification of the type variants
Example:
6144 PF01* JF80*
Type
designation
Type approval code Electrical connection
* all variants of the flipper valve are listed in the following tables "Type
approval code" and "Electrical connections".
Type approval code:
PF01 Ex ia IIC T6 Installation as a single device
PF02 Ex ia IIC T6 Installation in a block assembly
PF03 Ex ia IIC T5 Installation as a single device
PF04 Ex ia IIC T5 Installation in a block assembly
PF06 Ex ia IIC T4 Installation as a single device
PF07 Ex ia IIC T4 Installation in a block assembly
Electrical connections:
JC09 2 impressed single wires 0.2mm 2 (AWG24)
JC14 3 impressed single wires 0.2mm 2 (AWG24)
JC36 2 impressed FEP wires 0.2mm 2 (AWG24)
JF79 Round connector M8
JF80 Rectangular connector 2-pin
JF81 Rectangular connector 3-pin
JF82 Rectangular connector 2-pin without protective collar
JG78 Rectangular connector 3-pin without protective collar
6.5. Functional data
The solenoid valve 6144 is available in a single and double valve
design with 3 versions each.
Version
Resistance
R20 [
Ω ]
Minimum
terminal
voltage [V] Minimum
current
[mA]
01
Version for the use with
300
Ω supply module
320 9,3 29
02
High-impedance
version
510 11,7 23
03
Version for theuse at
the valve terminal 8650
125
Single valve
6.1 49
Double valve
5.28 42