beautypg.com

Burkert Type 6606 User Manual

Page 5

background image

16

label

7.5.

Example:

Made in Germany

00450000

W14UN

CE

6606 T 1,6 FKM PD
G1/8 PNVAK 2 bar
24V DC 3.4W

Identification number

Voltage/frequency output

Nominal connection pressure

Type

Circuit function

Orifice

Seal material

Body material

english

17

electrical data

7.6.

Connections:

Spade connection in accordance
with DIN 43650 C for cable plug
Type 2506 on top or on side
Rectangular plug for Type 2505
2 FEP flying leads, AWG24,
500 mm long

Power supply:

12 V DC
24 V DC
110 – 120 V UC
230 – 240 V UC

Voltage tolerance

±10 % - Residual ripple 10 %

Nominal output
12 – 24 V

3.4 W

110 – 240 V

4.0 W

Nominal
operating mode

100 % continuous operation

for block installation if temperatures of media or

surrounding area above +40 °C:
Intermittent duty 40 % (10 min)

Note the information specified on the label for
voltage, type of current, and pressure.

english

17

18

insTallaTiOn

8.

safety instructions

8.1.

Danger!

Risk of injury from high pressure in the equipment!

Before loosening the lines and valves, turn off the

pressure and vent the lines.

Risk of injury due to electrical shock!

Before reaching into the device or the equipment,

switch off the power supply and secure to prevent

reactivation!
Observe applicable accident prevention and safety

regulations for electrical equipment!

Warning!

Risk of injury from improper installation!

Installation may be carried out by authorized technicians

only and with the appropriate tools!

Risk of injury from unintentional activation of the
system and an uncontrolled restart!

Secure system from unintentional activation.

Following installation, ensure a controlled restart.

english

19

8.2. fluid installation

Danger!

Risk of injury from high pressure in the equipment!

Before loosening the lines and valves, turn off the

pressure and vent the lines.

Installation position: any, actuator preferably upwards.

Installation

Before installation, clean any possible dirt off the pipe-

lines and flange connections.
If required, install a dirt trap to prevent malfunctions.

Mesh size:
5 µm

Pay attention to the flow direction of the valve.

english

19

Type 6126 / 6606

This manual is related to the following products: