Burkert Type 6606 - Manual (Page 2)

4
inTended use 3.
Non-intended use of the solenoid valves Type 6126
and Type 6606 can be dangerous to people, nearby
equipment and the environment.
The solenoid valves Type 6126 and Type 6606 are •
designed for use in analytical, medical and laboratory
technology. They can be used primarily for the metering,
filling, mixing and distribution of small amounts.
Do not use the device outdoors.
•
Use according to the authorized data, operating condi- •
tions and conditions of use specified in the contract
documents and operating instructions. These are
described in the chapter entitled “ 7. Technical Data”.
The device may be used only in conjunction with third- •
party devices and components recommended and
authorized by Bürkert.
Correct transportation, correct storage and installation
•
and careful use and maintenance are essential for
reliable and faultless operation.
Use the device only as intended.
•
english 5
restrictions 3.1.
If exporting the system/device, observe any existing
restrictions.
possible errors in use 3.2.
The solenoid valves Type 6126 and Type 6606 must not be •
used in areas where there is a risk of explosion.
Do not supply the medium connectors of the system with
•
flammable media.
Do not put any loads on the housing (e.g. by placing objects
•
on it or standing on it).
Do not make any external modifications to the device
•
housings. Do not paint the housing parts or screws.
english 5
6
basic safeTy 4.
insTrucTiOns
These safety instructions do not make allowance for any
contingencies and events which may arise during the •
installation, operation and maintenance of the devices.
local safety regulations – the operator is responsible for
•
observing these regulations, also with reference to the
installation personnel.
Danger!
Danger – high pressure!
Before loosening the lines and valves, turn off the •
pressure and vent the lines.
Risk of electric shock!
Before reaching into the device or the equipment, •
switch off the power supply and secure to prevent
reactivation!
Observe applicable accident prevention and safety
•
regulations for electrical equipment!
Risk of burns/risk of fire if used continuously through
hot device surface!
Keep the device away from highly flammable sub- •
stances and media and do not touch with bare hands.
english 7
Warning!
General hazardous situations.
To prevent injury, ensure that:
The system cannot be activated unintentionally. •
Installation and repair work may be carried out by •
authorized technicians only and with the appropriate
tools.
After an interruption in the power supply or pneumatic
•
supply, ensure that the process is restarted in a
defined or controlled manner.
The device may be operated only when in perfect
•
condition and in consideration of the operating
instructions.
The general rules of technology apply to application
•
planning and operation of the device.
english 7
Type 6126 / 6606