eLine Technology EPTZ-27DN User Manual - Manual (Page 7)

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
6
2.4 Display Options
Set the display of dome info or function.
2.4.1 Camera Name Setup
Set the camera name
2.5 Control Options
Set Auto Flip、Auto Focus、Auto AE, etc Move the joystick left/right or press
OPEN to enter control options
Operation steps
[1].Joystick up/down to move the cursor to
select Display Options
[2].Joystick left/right to enter Display Option
[3].Joystick up/down to select either one of the
sub-menu
[4].Joystick left/right to select ON/OFF
DISPLAY OPTIONS
1 CAMERA NAME SETUP
2 COORDINATES ON
3 START_UP SCR MSG ON
4 CROSSHAIRS ON
CAMERA NAME SETUP
1 NAME ___________
2 NAME DISPLAY OFF
PLEASE ENTER:
WELCOME_________
ABCDEFGHIJKLN
OPQRSTUVWXYZ
0123456789_
IRIS OPEN WHEN DONE
IRIS CLOSE TO EXIT
1.NAME
[1].Move the joystick up/down to move the
cursor to select the Name.
[2].Move the joystick left/right or press OPEN
to enter name editing menu.
[3].Joystick left/right to select programming
position and press OPEN to confirm,
joystick left/right again to select( 0~9 or
A~Z ). Press OPEN to confirm selection.
Press CLOSE to exit or return to the
previous menu level when programming
is done.
6 VECTORSCAN STILL OFF
7 AUTO FOCUS OFF
8 AUTO AE OFF
9 VECTORSCAN AF OFF
10 -2 TILT LIMIT OFF
11 SPEED LIMIT OFF
CONTROL OPTIONS
1 DOME ADDR STETUP
2 AUTO FLIP ON
3 PROPORTIONAL SPD ON
4 PAN REVERSE OFF
5 TILT REVERSE OFF