CEMB USA ER100-i (B) - Manual (Page 67)

67
Use and Maintenance Manual Rev. 12-2012
ENGLISH
Decreases the value
Increases the value
Displays a calculator to
enter values directly
Confirms the default parameters
Goes back to the reserved setup screen
Return to main screen
8.3.6 Wheel runout
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the reserved setup screen
Return to main screen
Wheel first harmonic limit: Represents the first harmonic limit beyond which it is considered appropriate
to turn the tyre on the rim by 180°. Recommended limit = 1.2 mm.
Rim first harmonic limit: Represents the first harmonic limit of the rim below which it is not considered
appropriate to turn the tyre on the rim.
Recommended limit = 0.3 mm.
Minimum correction limit: Represents the minimum correction limit obtainable below which it is not
considered appropriate to turn the tyre on the rim. Recommended limit =
0.8 mm.
Default parameter setting: Resets the default machine settings.
Reserved Setup