CEMB USA ER100-i (B) - Manual (Page 28)

28
Use and Maintenance Manual Rev. 12-2012
ENGLISH
6.8 UNBALANCE SPLIT
Use of the wheel balancing machine
1. With the wheel in the outside correction position,
press the button to release it.
2. Select a spoke close to the position indicated by the
laser and press the button
T
he WhITe lINe oN The RIm INdIcATes The uNbAlANce
coRRecTIoN posITIoN NoT splIT
.
I
f The symbol AppeARs
,
IT meANs ThAT you cANNoT
selecT The fIRsT spoKe AT ThAT poINT
(
mAxImum dIsTANce
150°).
3. Turn the wheel in the direction indicated on the screen
and select the second spoke by pressing the button
I
f The symbol AppeARs
,
IT meANs ThAT you cANNoT
selecT The secoNd spoKe AT ThAT poINT
(
mINImum dIsTANce
18°,
mAxImum dIsTANce
120°).
4. At this stage, two indications appear on the screen for
positioning of the unbalance correction weights.
To cancel the split, press the button :
Any error in this procedure is clearly shown on screen.
The split function is enabled for the outside of aluminium rims ( ALUMINIUM RIMS ) and is used to hide any adhesive
unbalance correction weights behind the rim spokes.
To split the unbalance measured in two different positions, proceed as follows: