CEMB USA ER100-i (B) - Manual (Page 56)

56
Use and Maintenance Manual Rev. 12-2012
ENGLISH
Setup
8.2 GENERAL SETUP
Gives the user the possibility of setting the machine according to need. All the settings remain unaltered even
when the machine is turned off.
8.2.1 General setup 1/3
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the main menu screen
Goes to the setup screen 2/3
Return to main screen
Language: allows selecting the language to be used to display the descriptive and diagnostic mes-
sagesrelating to machine operation.
Screensaver (min.): allows selecting when the screensaver will be activated after the machine has not been
used for a certain time.
Screensaver type: allows customising the screensaver with any kind of image in .jpg format. ( SCREEN-
SAVER CUSTOMISATION )
Linear unit of measure: selects the unit of measure (mm/inch)
Correction method: allows selecting from 3 correction methods: STANDARD, EXTERNAL PLANES, BPC
STANDARD The wheel balancing machine considers the unbalance within tolerance when the value of
each single plane is lower than the tolerance set.
EXTERNAL PLANES The unbalance is considered within tolerance when the weight recalculated on the external
planes (clip-on weight) is lower than the tolerance set.