CEMB USA ER100-i (B) - Manual (Page 29)

29
Use and Maintenance Manual Rev. 12-2012
ENGLISH
Press the button from the second set of buttons on the unbalance measurement screen after performing a
balancing spin.
T
hIs fuNcTIoN cANNoT be Accessed If you hAve NoT fIRsT peRfoRmed A bAlANcING spIN
.
The program allows total wheel unbalance to be reduced by compensating, when possible, tyre and rim unbalance
values. It requires two spins, rotating the tyre on the rim on the second spin.
At the end of the procedure, mark the rim and tyre positions indicated by the machine with a piece of chalk and re-
mount both so that they coincide.
Use of the wheel balancing machine
6.9 UNBALANCE OPTIMISATION
Confirm
Return to main screen