CEMB USA ER100-i (B) - Manual (Page 59)

59
Use and Maintenance Manual Rev. 12-2012
ENGLISH
8.2.2 General setup 2/3
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the setup screen 1/3
Goes to the setup screen 3/3
Return to main screen
Static unbalace always present: Enables/disables temporary display of the unbalance on the correction planes
selected and the STATIC unbalance
Wheel locking: Enables/disables wheel locking in the correction position
Wheel runout: Enables/disables wheel eccentricity measurement
Rim runout: Enables/disables rim eccentricity measurement
Runout diagnosis: Enables/disables display of the runout values on the unbalance measurement
screen
Lift: Enables/disables the lift
Selecting ON+HELP, online help is enabled on the measurement screen, cre-
ated with the aim of helping the user to properly use the lift.
Printer: Enables/disables the printer
Tyre set: Enables/disables the tyre set function
Default parameter setting: Resets the default machine settings
Setup