CEMB USA DWA 1000XLB - Manual (Page 21)

I 0645 22
1
2
3
4
GB
5.3 - Loads
To access this page, press from the Vehicle Specifi cations page
The Loads page allows viewing the loads to be positioned in the vehicle and the amount of fuel there needs
to be in the tank as specifi ed by the manufacturer.
Vehicle 1.
Percentage fuel in the tank 2.
Loads to be positioned on the seats (kg) 3.
Loads to be positioned in the luggage compartment (kg) 4.
With reference to the fi gure check as far as possible the percentage fuel in the tank and if loads need to be
positioned in the passenger and luggage compartments of the vehicle being measured.
: Goes back to the Vehicle Specifi cations page
5.4 - Vehicle customisation
To access this page, press then from the Vehicle Specifi cations page
The Vehicle Customisation page allows adding vehicles to the vehicle database.
To do this, fi rst select a vehicle on the Vehicle Selection page and then access this page to modify the
model and the specifi cations. Of course, starting from a vehicle with similar specifi cations to the one to be
added will simplify the job.
On this page you cannot change the vehicle manufacturer, which must therefore be selected fi rst. You
cannot add vehicles whose manufacturer is not already in the list of manufacturers on the Vehicle Selection
page. There is however a generic manufacturer name called 'Extra' at the end of the list where these vehi-
cles can be added. You cannot add ride height data nor adjustment help images.