CEMB USA C202 - Manual (Page 8)

I 0592 - 8 GB
5 - INDICATIONS AND USE OF THE WHEEL BALANCER
The monitor shows several information and suggests various alternative ways of use to the operator.
This is done through various “screens”.
5.1 - Initial screen ►
Buttons enabled
: main functions screen (
MENU ACCESS DIAGRAM
)
: type of correction (
ALU AND STATIC MODES
)
: Vehicle/truck selection
: balancing spin (
RESULT OF MEASUREMENT
)
Dimensions gauge : when extracted, the Dimensions screen is selected (
PRESETTING OF WHEEL DIMEN-
SIONS
).
If the machine remains on the initial screen for a certain amount of time without being used, the system is automati-
cally switched to a screen-save. Striking of any key, movement of the wheel or distance + diameter gauge will cause
automatic switching from the screen-save menu to the initial screen.
5.1.1 - Screen-save screen
N.B.: Name of the wheel balancer’s owner. Can be preset via the monitor (
PRESETTING
THE CUSTOMER AND USER NAME
).
►