CEMB USA C202 User Manual
Page 4
I 0592 - 4
2
2a
GB
1.4 - Specifi cation
Single phase power supply
230 - 400 V Three-phase
Protection class
IP 54
Max. power consumption
1,5 Kw
Monitor
TFT 15”
Balancing speed
160 min-1 for cars - 70 min-1 for trucks
Cycle time for wheel
8 to 20 seconds
Balancing accuracy
1 gram for cars / 10 grams for trucks
Position resolution
± 1.4°
Average noise level
< 70 dB(A)
Distance rim - machine
0 - 300 mm (400 mm max. presettable)
Rim width setting range
1.5” to 20” or 40 to 510 mm
Diameter setting range
10 to 30” or 265 to 765 mm
Max. wheel weight
250 kg
Max. wheel diameter
1300 mm
Min/max. compressed air pressure
8 to 10 kg/cm
2
approx. 0.8 to 1MPa
approx. 8 to 10 BAR
approx. 115 to 145 PSI
2 - HANDLING AND LIFTING
The balancing machine must be lifted only by levering on the substructure / base at the 3 specifi c fi xing
points. Other points - such as the spindle, the workhead or the accessory bench - must not be subject to any
kind of force.
Make sure that the balancing machine contacts the fl oor at all three support points. It will operate correctly without
having to be secured to the ground.
►