MoTeC M8 User Manual
Page 51

MoTeC
E.M.P.
Software
49
Selecting the Adjust Screen
The Select Screen menu will be displayed when entering the Adjust Screens
so that the desired screen may be selected.
Selecting a Different Screen
The Adjust Screen may be changed at any time by pressing the Esc key to
re-display the Select Screen Menu.
Exiting to the Main Menu
Press the Esc key to show the Select Screen Menu then select End.
Alternatively hold down the Alt key then press X.
Before exiting, any changes to the ECU calibration data may be saved to the
original file or optionally to a new file which will leave the original file
unchanged.
File Only Edit Mode
If the ECU is NOT Connected the File Data may be adjusted directly, the
changes can then be sent to the ECU at a later date.
It is normally better to make changes with the ECU Connected.