MoTeC M8 - Manual (Page 50)

48 E.M.P. Software
Help
The Help item shows general help that is not necessarily available through
the context sensitive help system.
Quit
To exit the E.M.P. Software select the Quit item from the menu or hold down
the Alt key then press X.
Context Sensitive Help
Context Sensitive Help is available at most times and may be activated by
pressing the F1 Key.
"Context Sensitive" means that the help screen shows information relevant to
the current screen or menu item.
Files
E.M.P. records the ECU calibration and setup data in files that are stored on
the PC hard disk, this ensures that a permanent record of the data is kept.
The files also record comments to allow easy identification of each file. Any
file may be sent to any ECU which will totally re-configure the ECU according
the calibration and setup data contained in the file.
Calibration and Setup
Selecting Adjust from the Main Menu allows adjustment of the ECU setup
and calibration data.
File Matching
Before entering the Adjust Screens the calibration data is first retrieved from
the ECU then matched to a file. If the ECU data does not match an existing
file then a new file will be created, at which point an Engine Description and
Comment should be entered to describe the file.