MoTeC M8 - Manual (Page 42)

40 Initial Starting Procedure
A bad REF signal has caused missing REF pulses - check voltage
levels with a scope.
Bad REF / SYNC alignment.
Incorrect Setup
No SYNC
Two or more consecutive SYNC pulses are missing.
Possible causes :
No SYNC signal - check the wiring and SYNC sensor voltage levels
with a scope.
A bad REF signal has caused many extra pulses - check voltage
levels with a scope.
Incorrect Setup
Multiple REF / SYNC Errors
Multiple REF / SYNC errors may occur, often the first error to occur is
the correct error.
Multiple errors may also occur due to incorrect Setup.