MoTeC M8 - Manual (Page 49)

MoTeC E.M.P. Software 47
Options Bar
The options bar shows the ECU serial number and which options are
currently enabled, a tick indicates that the option is enabled, an x indicates
that the option is not enabled and an * indicates that the option is temporarily
enabled during the evaluation period.
Menu Bar
The bottom line is called the Menu Bar. This shows which key strokes are
valid and what they do, or it gives special instructions.
Always look at this line to see what options are available.
Main Menu
The Main Menu is used to select the desired operation. To select an item use
the Up and Down Arrow keys then press the Enter key.
Adjust
The Adjust item gives access to the various calibration and setup screens.
The calibration screens are detailed later in this document.
View
The View item allows viewing of the engine data and sensor readings.
Diagnostics
The Diagnostics item allows checking of the Diagnostics Errors and allows
testing of Injectors, Ignition and Auxiliary Outputs while the engine is stopped.
File
The File item gives access to the various file management functions.
Any file may be sent to any ECU by selecting Select File / Send Data to ECU
from the File menu.