MoTeC BR2 BTX - Manual (Page 3)

MoTeC Introduction 1
Introduction
This manual covers the operation of the MoTeC Lap Beacon system.
The MoTeC Lap Beacon system consists of a Beacon Transmitter (BTX) and
a Beacon Receiver (BR2).
The Beacon Transmitter is mounted beside the track and the Beacon
Receiver is fitted in the vehicle and connected to a Data Logging or Engine
Management system.
The Lap Beacon system is used to mark the start of a lap. This can be used
by a display to show the driver lap times and lap number and can be used by
a data logging system for lap time and start of lap information. The Lap
Beacon may also be used to generate split times by placing multiple
transmitters around the race circuit.