MoTeC BR2 BTX - Manual (Page 15)

MoTeC BR2 Beacon Receiver 13
BR2 Beacon Receiver
Mounting
The BR2 mounting may need to be designed to allow it to be mounted at
either side of the vehicle, depending on which side of the track the transmitter
will be located. See Appendix L – BR2 Mounting Dimensions for details.
Notes:
• The receiver window (rectangular black window) and LED must not be
obscured.
• Do not mount near a radio transmitter or radio transmitter antenna.
• Do not mount near the engine ignition system.
Range
The MoTeC Lap Beacon has a range of up to 40m (130ft).
See Appendix A – Range Specification and Range in the Overview section for
more detail.
Aiming
The unit must be mounted within 5 degrees (2 degrees preferred) of optimum.
See the diagram in the Overview section for details.
Maintenance
Keep the receiver window clean (the rectangular black window).
Ensure that the BR2 is aligned correctly - within 5 degrees of optimum (2
degrees preferred)