Trouble shooting, Check the transmitter – MoTeC BR2 BTX User Manual
Page 27

MoTeC
Trouble
Shooting
25
Trouble Shooting
1. Check the Transmitter
1A. Check the Transmitter LED
Green
OK
Orange
The battery voltage is less than 10.5 Volts, the battery requires charging.
Red
• If the battery voltage is less than 10.5 Volts then the battery should be
charged.
• If the battery voltage is greater than 10.5 Volts, there may be a fault with
the Transmitter.
Off
Check that the battery is connected correctly, Red wire to battery positive,
Black wire to battery negative and that the battery is supplying at least 10.5
volts.
1B. Check the Transmitter Aiming
Check that the Transmitter is aligned correctly, it must be within 5
° of optimum
(2
° preferred).
1C. Check the Transmitter Spacing
Check that the Transmitter is at least 6m (20ft) from adjacent transmitters.