Brickcom BRC-64 - Manual (Page 45)

Sequence
This function is used to set the display sequence for live view of the cameras. There are
two ways to add cameras to the sequence.
1. Click on the icon and choose to setup the sequence.
Select a camera and move from the ‘Camera List’ to the ‘Sequence Display Camera
List’ in the preferred sequence order. The user can setup the display time interval
(from 1 to 600 seconds) and split mode of sequence display (1*1, 2*2, 3*3, 4*4, and
5*5). Click to save the settings.
2. Right click on a desired grid and select  to add, or
to remove.
NOTE
When the sequence is added, a capital ‘S’ will be shown on the icon.
Storage
45 45