Brickcom BRC-64 - Manual (Page 19)

5.1 If is selected, the above
pages will be displayed.
6. If the camera supports the EasyLink TM function, the above page
will be displayed. Otherwise, this page will not be shown. *If
desired, click to skip this setting. EasyLink
TM
is a unique
Brickcom function which allows users to assign a unique EasyLink
name to their network camera’s IP address. There is no need to
configure the router to open up ports or remember hard-to-
memorize IP addresses. Users can log onto
[uniqueEasyLinkname].mybrickcom.com to view the camera’s web
GUI and live view.
 Enter a unique EasyLink name whose length must be
between 5-32 characters.
19 19