B&K Precision 1785B - Manual - Manual (Page 6)

6
Menu description
>MAX VOLT Set the maximum output voltage value
>INIT OUT Initiate the output state to ON or not
>INIT VOL Initiate the output voltage to 0 volt or not
>KEY SOUN Switch On/Off the buzzer sound when you press
any key
>BAUD
RATE Set the communication baud rate
>ADDR Set the communication address
>KEY LOCK Set the password for function keys
>EXIT Exit
Display annunciators
OFF The power supply’s
output is off Timer Not used
CV Constant voltage
mode Sense Not used
CC Constant current
mode Ext Not used
* Not used Adrs The instrument is
communicating with an
IT-E131/IT-E132/IT-E133
Meter Meter mode Rmt The instrument is in remote
state. The only active key is
the Local KEY.
Shift Not used Error The instrument has error
OVP Over voltage protect
state Prot Not used
OCP Over current protect
state Lock The keyboard is locked by a
password
Menu