B&K Precision 1785B - Manual - Manual (Page 31)

31
Chapter 5 PV1785B-1788 Software
5.1 Introduction
Software PV1785B-1788 is control software for IT1785B-1788 series programmable power supply. It can
work with all single-output power supply models. Please make sure that you purchased communication
cable, and use it to connect the power supply and computer before the communicating. This software
can accomplish all the functions of the power supply, such as setting constant voltage, setting constant
current, max voltage etc. Also you can make quickly settings or make a program for the output voltage
and current by the computer. In addition, PV1785B-1788 offer a GO/NG test function for automatic
factory testing. It brings you much convenience when you use the power supply.
5.2 System Installation
1．Requirements for the computer
Pentium III or Pentium IV processor-based personal computer
Windows 98/2000/XP or Windows NT4.0
2. Insert the CD-Rom which supplied with the instrument to the CD driver, and install the software step
by step according to the instructions.
5.3 Functions of PV-1785B-1788
Start the software PV1785B-1788, the windows is as follows:
1
2
3
4
5 6 7 8
9
10
11
1
2
3
4
5 6 7 8
9
10
11