Autel MaxiDiag Elite MD701 User Manual
Page 75

73
Figure 8.8
B. Cable tensioning
Once the brake cable is fit in, you would use this function to
adjust its tension. It will take a few seconds to execute this
command.
Figure 8.9
When the job is done successfully, the tool will display a
message to confirm.
Figure 8.10
Put in fitting/removal position
Activation done, a problem
occurred during the operation.
Press any key to continue
OK
Cable tensioning
Cable tensioning done.
Now calibrate the Electric parking
brake (see “Electric parking
brake replacement” menu)
Press any key to continue
OK
Cable tensioning
Activation in progress!
OK
This manual is related to the following products: