Autel MaxiDiag Elite MD701 User Manual
Page 42

40
If you press Yes function button or OK button, a warning
message will come up asking your confirmation. (Figure 6.7)
Figure 6.7
3) Press the OK button to confirm.
If the codes are cleared successfully, an “Erase Done!”
confirmation message shows on the display.( Figure 6.8)
Figure 6.8
If the codes are not cleared, then an “Erase Failure. Turn Key
on with Engine off!” message appears. (Figure 6.9)
Figure 6.9
Erase Codes
Erase Failure.
Turn Key on with
Engine Off!
Press any key to continue
Erase Codes
Erase Done!
Press any key to continue
.
Erase Codes
DTCs and Freeze Data will be lost
Do you wish to continue?
Yes No
.
This manual is related to the following products: