Autel MaxiDiag Elite MD701 - Manual (Page 26)

24
Figure 5.14
5.2 Diagnostic Test
After you have entered the correct vehicle information, the
diagnostic testing selection will display as below:
Figure 5.15
5.2.1 Auto Scan
Depending on the scan tool model, Auto Scan function will carry
out an overall scan to check the status of all systems or four systems
(engine, transmission, airbag and ABS) on the vehicle being tested.
Selecting Auto Scan will lead to retrieve the trouble codes in each
system of the vehicle one by one. It will take a few minutes to
display.
Use the UP/DOWN scroll button to select Auto Scan from Main
Groups menu (Figure 5.15), and press the OK button.
Select An Option
1. Auto Scan
2. Control Unit
3. Vehicle Information