Atec Yokogawa-WT1800 - Manual (Page 18)

Product Featur
es
Functions/Displays
Applications
Softw
ar
e
Comparisons
Explanations
Specifications
Specifications Specifications Specifications
19
Computer Interface
GP-IB Interface
Item Specification
Compatible devices National Instruments
• PCI-GPIB or PCI-GPIB+
• PCIe-GPIB or PCIe-GPIB+
• PCMCIA-GPIB and PCMCIA-GPIB+
• GPIB-USB-HS
Use an NI-488.2M Version 1.60 or later driver
Electrical and mechanical specifi cations
Conforms to the IEE Standard 488-1978 (JIS C 1901-1987)
Functional specifi cations SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0
Protocol Conforms to the IEEE Standard 488.2-1992
Encoding SO (ASCII)
Mode Addressable mode
Address 0 to 30
Clearing remote mode Remote mode can be cleared by pressing the LOCAL key
(except during Local Lockout)
Ethernet Interface
Item Specification
Number of communication ports
1
Connector type RJ-45 connector
Electrical and mechanical specifi cations
Conforms to the IEEE802.3
Transmission method Ethernet 1000BASE-T, 100BASE-TX, 10BASE-T
Communication protocol TCP/IP
Applicable services FTP server, DHCP, DNS, remote control (VXI-11), SNTP, FTP client
USB PC Interface
Item Specification
Number of ports 1
Connector Type B connector (receptacle)
Electrical and mechanical specifi cations
Conforms to the USB Rev. 2.0
Applicable transfer standards
HS (High Speed) mode (480 Mbps), FS (Full Speed) mode (12 Mbps)
Applicable protocols USBTMC-USB488 (USB Test and Measurement Class Ver.1.0)
Applicable system environment
The PC must run the Japanese or English version of Windows 7 (32-bit),
Vista (32-bit), or XP (SP2 or later, 32-bit), and be equipped with a USB port.
USB for Peripheral Devices p p p
Item Specification
Number of ports 2
Connector type USB type A connector (receptacle)
Electrical and mechanical specifi cations
Conforms to USB Revision 2.0
Applicable transfer standards
HS (High Speed) mode (480 Mbps), FS (Full Speed) mode (12 Mbps),
LS (Low Speed) mode (1.5 Mbps)
Applicable devices Mass storage device conforming to USB Mass Storage Class Version 1.1
109 and 104 keyboards conforming to USB HID Class Version 1.1
Mouse conforming to USB HID Class Version 1.1
Power supply 5 V, 500 mA (for each port). However, devices that exceed the maximum current
consumption of 100 mA cannot be connected to two ports simultaneously.
Built-in Printer (Option)
Item Specification
Printing method Thermal line dot method
Dot density 8 dots/mm
Paper width 80 mm
Effective recording width 72 mm
Auto Print Allows you to set the interval time for printing to automatically print the measured
values. The start/stop time can also be set.
General Specifi cations
Item Specification
Warm-up time Approximately 30 minutes
Operation environment Temperature: 5 to 40°C
Humidity: 20 to 80%RH (no condensation)
Operating altitude 2000 m or less
Installation location Indoors
Storage environment Temperature: -25 to 60°C
Humidity: 20 to 80%RH (no condensation)
Rated power supply voltage
100 to 240 VAC
Allowable power supply voltage fl uctuation range
90 to 264 VAC
Rated power supply frequency
50/60 Hz
Allowable power supply frequency fl uctuation range
48 to 63 Hz
Maximum power consumption
150 VA (when using a built-in printer)
Dimensions (see s ection 12.13)
Approximately 426 mm (W) × 177 mm (H) × 459 mm (D) (Excluding the handle and
other projections when the printer is stored in the cover)
Weight Approximately 15 kg (including the main body, 6 input elements, and options)
Battery backup Setting information and built-in clock continue to operate with a lithium backup
battery.
Display
Numerical Display
Item Specification
Display digit (display resolution)
less than 60000: 5 digits
60000 or more: 4 digits
Number of display items Select 4, 8, 16, Matrix, ALL, Harmonic Single List, Harmonic Dual List, and Custom
Waveform Display
Item Specification
Display format Peak-to-peak compression data
If the time axis is set so that there will be insuffi cient sampling data, the part
lacking data is fi lled with the preceding sampling data.
Sampling rate Approximately 2 MS/s
Time axis Range from 0.05 ms to 2 s/div. However, 1/10 or less of the data update rate.
Trigger • Trigger type Edge type
• Trigger mode Select OFF, Auto, and Normal. Automatically turned OFF
during integration.
• Trigger source Select voltage or current input to the input element or external
clock
• Trigger slope Select Rise, Fall, or Rise/Fall
• Trigger Level Set the trigger level in the range of ±100% from the center of the
screen (from top to bottom of the screen) if the trigger source is
the voltage or current input to the input element.
The set resolution is 0.1%.
• TTL level if the trigger source is Ext Clk (external clock).
Time axis zoom function Not available
* Waveforms can be represented faithfully at up to approximately 100 kHz because the sampling rate is
approximately 2 MS/s.
Data Store Function
Item Specification
Store Store numerical data in media. (Media: USB storage device, max. 1 GB)
Store interval 50 ms (when waveform display is OFF) to 99 hours 59 minutes 59 seconds
Storage time when using 1 GB memory (Numerical Store and Waveform Display OFF)
Number of
measurement channels
Number of
measurement items (each channel) Storage interval Storable time (Approx.)
3 ch 5 50 ms 5 days
3 ch 20 50 ms 56 hours
3 ch Each harmo nic component data of DC
to the 100th order of voltage, current,
and power 50 ms 4 hours
6 ch 5 1 sec 86 days
6 ch 20 1 sec 24 days
6 ch Each harmonic component data of DC
to the 100th order of voltage, current,
and power 1 sec 40 hours
6 ch Each harmonic component data of DC
to the 100th order of voltage, current,
and power 100 ms 49 minutes
*One piece of data is 4 bytes, and the limit to the number of store operations is 9999999 counts.
File Function
Item Specification
Save Save setting information, waveform display data, numerical data, and screen image
data to media
Read Read the saved setting information from media.
Auxiliary I/O
I/O Section for Master/Slave Synchronization Signals
Item Specification
Connector type BNC connector: Applicable to both master and salve
I/O level TTL: Applicable to both master and slave
Measurement start delay time
Within 15 sample intervals: Applicable to master
Within 1 μs + 15 sample intervals: Applicable to slave
External Clock Input
Common
Item Specification
Connector type BNC connector
Input level TTL
When a synchronization source for normal measurement is used as the external clock for input
Item Specification
Frequency range Same as the measurement range of frequency measurement.
Input waveform Square waveform with a duty ratio of 50%
When a PLL source for harmonic measurement is used as the external clock for input
Item Specification
Frequency range Harmonic measurement (/G5 or /G6) option: 0.5 Hz to 2.6 kHz
Input waveform Square waveform with a duty ratio of 50%
Trigger gg
Item Specification
Minimum pulse width 1 μs
Trigger delay time Within (1 μs + 15 sample intervals)
RGB Output (Option)
Item Specification
Connector type D-sub 15-pin (receptacle)
Output format Analog RGB output