Atec Kikusui-TOS9201 - Manual (Page 5)

8 Kikusui Electronics Corporation
TOS9200 SERIES
For Stand alone use...
For Multiple Channel Testing by High Voltage Scanner...
1
Example of system for applying voltage by Test Lead or start/stop operation by Remote Control Box.
Item Model cable length Reguired numbers
1 Hipot / Insulation Resistance Tester AC/DC TOS9201 1 pc.
2 High-Voltage Test Lead TL01-TOS 1.5m *1 1 set
3 Remote Control Box RC01-TOS *2 1.5m 1 pc.
*1: Also available for 3m cable, TL02-TOS
*2: Also available for both-hands operation, RC02-TOS
Example of system for applying voltage or start/stop operation by High-Voltage Test Probe.
Item Model cable length Reguired numbers
1 Hipot / Insulation Resistance Tester AC/DC TOS9201 1 pc.
2 High-Voltage Test Lead HP01A-TOS 1.5m *1 1 pc.
*1: Also available for 3m cable, HP02A-TOS
1
Example of system consisting TOS9201 and TOS9221 ✕ 2sets (8CH)
Item Model cable length Reguired numbers
1 High-Voltage Scanner TOS9221 2 pc.
2 Hipot / Insulation Resistance Tester AC/DC TOS9201 1 pc.
3 Interface cable 85-50-0210 0.5m *1 2 pc.
4 High-Voltage Test Lead (red) TL07-TOS 1.5m 8 pc.
5 High-Voltage Leads for Parallel connection TL06-TOS 0.5m *2 2 set
*1: Also available for 2m cable, DD2M-8P
*2: Also available for 1.5m cable, TL04-TOS
[Rack mount bracket]
TOS9200 / 9201 (JIS) KRB150-TOS
(EIA) KRB3-TOS
TOS9220 / 9221 (JIS) KRB100-TOS
(EIA) KRB2-TOS
[CAUTION] In case of using more than 2sets of High Voltage Scanner, it is required
to rack mount or locate these units to the side of Hipot / Insulation Resistance Tester,
and it should not be piled up more than 2sets of High Voltage Scanner units.
2
3
DUT
DUT
to DUT
to DUT
1
1
3 4 5
3 4 5
2
2
Hipot Tester with Insulation Resistance Test