Atec Agilent-E5052A - Manual (Page 10)

Figure 1-5. Dimensions (front view, in millimeters, nominal)
Figure 1-6. Dimensions (rear view, in millimeters, nominal)
Figure 1-7. Dimensions (side view, in millimeters, nominal)
Table 1-28. Measurement capabilities
Number of
Up to 4 measurement windows
measurement windows: and 1 user defined window
Data markers:
6 independent markers per trace. Reference
marker available for delta marker operation.
Marker functions
Marker search:
Max value, min value, peak, peak left, peak
right, target, target left, target right,
multi-peak, multi-target, bandwidth
parameters with user-defined bandwidth
values
Marker-to functions: Set, start, stop, center to active marker
stimulus value; set reference to active
marker response value
Search range: User definable
Tracking: Performs marker search continuously or on
demand
User defined window
Number of trace: 8 data traces and 8 memory traces
Table 1-29. DC power/control voltage setting
Measured number
User definable from 2 to 1001
of points per sweep
(standard only):
Sweep type (parameter) Control voltage sweep, power voltage
(standard only):
sweep
Control voltage: Set control voltage from –15 V to +35 V
Power voltage: Set power voltage from 0 V to +16 V
Table 1-30. Trace functions
Display data:
Display current measurement data, memory
data, or current measurement and memory
data simultaneously
Trace math: Addition, subtraction, multiplication
or division of trace or memory data
Title: Add custom title to each measurement
window. Titles are printed on hard copies of
displayed measurements
Autoscale: Automatically selects scale resolution and
reference value to vertically center the
trace
Statistics: Calculates and displays mean, standard
deviation and peak-to-peak deviation of the
data trace
10