Atec Agilent-N5171B - Manual (Page 29)

29
Memory
• Memory is shared by instrument states, user data files, sweep list files, waveform sequences, and other files
• 3 GB (30 GB with Option 009) memory available in the N5172B
• Security Option 006 allows storage of up to 8 GB on SD card
• Depending on how the memory is utilized, a maximum of 1000 instrument states can be saved
Security (Option 006)
• Removable 8 GB solid state memory (SD card) from rear panel
• User can force all files to be stored only on external memory card including instrument states, user data files, sweep list files,
waveforms, waveform sequences, and other files.
• Memory sanitizing, memory sanitizing on, power on, and display blanking
• Disable USB ports
Note: Read/write speeds to external memory card will be slower compared to internal solid-state drive (Option 009)
Self-test
Internal diagnostic routines test most modules in a preset condition; for each module, if its node voltages are within acceptable limits,
the module passes the test
Weight
N5171B: ≤ 13.6 kg (30 lb) net, ≤ 28.6 kg (63 lb.) shipping
N5172B: ≤ 15.9 kg (35 lb) net, ≤ 30.8 kg (68 lb.) shipping
Dimensions
88 mm H x 426 mm W x 489 mm L (length includes rear panel feet)
(3.5 in H x 16.8 in W x 19.2 in L)
Max length (L) including RF connector tip to end of rear panel feet is 508 mm (20 in)
Recommended calibration cycle
36 months
ISO compliant
This instrument is manufactured in an ISO-9001 registered facility in concurrence with Agilent Technologies’ commitment to quality.