Atec Agilent-N5171B - Manual (Page 12)

12
Residual FM (CW mode, 300 Hz to 3 kHz BW, CCITT, rms)
5 MHz to 6 GHz < N x 2 Hz (measured) (see N value in frequency band table)
Harmonics (CW mode)
Range Standard < +4 dBm Option 1EA < +12 dBm
9 kHz to 3 GHz < –35 dBc < –30 dBc
> 3 to 4 GHz < –35 dBc, typical < –35 dBc, typical
> 4 to 6 GHz < –53 dBc, typical < –40 dBc, typical
Nonharmonics (CW mode)
Range > 10 KHz offset
Standard (dBc)
9 kHz to < 5 MHz –65, nominal
5 to < 250 MHz –75
250 to < 750 MHz –75
750 MHz to < 1.5 GHz –72
1.5 to < 3.0 GHz –66
3 to 6 GHz –60
Subharmonics (CW mode)
9 kHz to 1.5 GHz None
> 1.5 to 3 GHz –77 dBc
> 3 to 6 GHz –74 dBc
Jitter 1
Carrier frequency SONET/SDH data rate rms jitter BW μUI rms, measured Seconds, typical
155 MHz 155 MB/s 100 Hz to 1.5 MHz 140 0.9 ps
622 MHz 622 MB/s 1 KHz to 5 MHz 67 0.11 ps
2.488 GHz 2488 MB/s 5 kHz to 20 MHz 271 0.11 ps
Phase coherence (Option 012)
LO input frequency range 250 MHz to 6 GHz, nominal
LO input power range 0 to +12 dBm, nominal
LO output frequency range 250 MHz to 6 GHz, nominal
LO output power range 0 to +12 dBm, nominal
1. Calculated from phase noise performance in CW mode at +10 dBm. For other frequencies, data rates, or bandwidths, please consult your sales
representative.