Atec Agilent-N5171B - Manual (Page 25)

25
GSM/EDGE output RF spectrum (ORFS)
GSM EDGE
Power level < +7 dBm < +7 dBm
Offset Configuration Frequency 1
Standard,
typical
Option UNV,
typical
Standard,
typical
Option UNV,
typical
200 kHz
1 normal timeslot,
bursted
800 to 900 MHz
1800 to 1900 MHz
–34 dBc –36 dBc –37 dBc –38 dBc
400 kHz –69 dBc –70 dBc –69 dBc –70 dBc
600 kHz –81 dBc –82 dBc –80 dBc –81 dBc
800 kHz –82 dBc –83 dBc –82 dBc –83 dBc
1200 kHz –84 dBc –85 dBc –83 dBc –84 dBc
3GPP2 cdma2000 distortion performance, typical
Standard Option UNV Option UNV + 1EA
Power level 2 ≤ 2dBm ≤ 2 dBm ≤ 5 dBm
Offset Configuration Frequency (1) Typical Typical Typical
885 kHz to 1.98 MHz
9 channel forward
link
800 to 900 MHz
–78 dBc –79 dBc –77 dBc
> 1.98 to 4.0 MHz –86 dBc –87 dBc –87 dBc
> 4.0 to 10 MHz –91 dBc –93 dBc –93 dBc
802.16e Mobile WiMAX™ distortion performance, measured
Power Offset 3 Configuration 4 Frequency
Standard,
measured
UNV, measured
<-7 dBm 10 MHz QPSK 2.5 and 3.5 GHz –65 dBc –68 dBc
Up to +5 dBm 10 MHz QPSK 3.5 GHz –62 dBc –65 dBc
1. Performance evaluated at bottom, middle, and top of bands shown.
2. This is rms power. Convert from rms to peak envelope power (PEP) with the following equation: PEP = rms power + crest factor
(for example: 3GPP test model 1 with 64 DPCH has a crest factor > 11 dB, therefore at +5 dBm rms the PEP = 5 dBm + 11 dB = +16 dBm PEP).
3. Measurement configuration: reference channel integration BW: 9.5 MHz, offset channel integration BW: 9 MHz, channel offset: 10 MHz.
4. 802.16e WiMAX signal configuration―bandwidth: 10 MHz, FFT: 1024, frame length: 5 ms, guard period: 1/ 8, symbol rolloff: 5%, content: 30 symbols
of PN9 data.