Atec Agilent-N5173B - Manual (Page 5)

5
Output parameters
Settable range
(with Option 1E1 and 1EA)
+30 to –130 dBm
Settable range
(without Option 1E1 and 1EA)
+19 to –20 dBm
Resolution 0.01 dB, (nom)
Step attenuator (1E1) 0 to 115 dB in 10 dB steps mechanical type
Attenuator hold range –15 dBm to maximum specified output power with step attenuator in 0 dB state; can be offset
using option 1E1 mechanical attenuator
Connector 513/520 = 3.5 SMA male, 532/540 = 2.4 mm male, 50 Ω (nom)
(Option 1ED adds Type-N connector to a 513 or 520)
Max output power 1 (dBm, with or without step attenuator, Option 1E1)
Frequency Standard High power Option 1EA
Option 513, 520
9 kHz to 3.2 GHz +18 +23
> 3.2 to 13 GHz +18 +20
> 13 to 20 GHz +15 +19
Option 532, 540
9 kHz to 3.2 GHz +14 +21
> 3.2 to 17 GHz +14 +16
> 17 to 31.8 GHz +13 +15
> 31.8 to 40 GHz +11 +15
1. Quoted specifications between 15 and 35 °C. Maximum output power typically decreases by 0.05 dB/°C for temperatures outside this range.
Amplitude Specifications
0
5
10
15
20
25
30
0 2 4 6 8 10 12 14 16 18 20
Maximum power
Options 513/520 with Option 1EA and 1E1 (CW rms, measured)
Frequency (GHz) vs. amplitude (dBm)
0
5
10
15
20
25
30
0 5 10 15 20 25 30 35 40
Maximum power
Options 532/540 with Option 1EA and 1E1 (CW rms, measured)
Frequency (GHz) vs. amplitude (dBm)