Atec Agilent-N5173B - Manual (Page 19)

19
USB Type-A There are two USB 2.0 Type-A connectors on the rear panel. Used with a memory stick
for transferring instrument states, licenses and other files into or out of the instrument;
also used with U2000 Series USB power sensors.
USB Type-B There is one USB 2.0 Type-B connectors on the rear panel. The USB connector
provides remote programming functions via SCPI.
LAN (1000 BaseT) The LAN connector provides the same SCPI remote programming functionality as the
GPIB connector. The LAN connector is also used to access the internal web server
and FTP server. The LAN supports DHCP, sockets SCPI, VXI-11 SCPI, connection
monitoring, dynamic hostname services, TCP keep alive. This interface is LXI class C
compliant. Trigger response time for the immediate LAN trigger is 0.5 ms (minimum),
4 ms (maximum), 2 ms (typ); delayed/alarm trigger is unknown. Trigger output
response time is 0.5 ms (minimum), 4 ms (maximum), 2 ms typical.
GPIB The GPIB connector provides remote programming functionality via SCPI.