Table of contents definitions – Atec Agilent-N5173B User Manual
Page 2
![background image](/manuals/318651/2/background.png)
2
Table of Contents
Definitions
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Frequency specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Amplitude specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Spectral purity specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Analog modulation specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Inputs and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Related literature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specification (spec):
Specifications represent warranted performance of a
calibrated instrument that has been stored for a minimum of 2 hours within the
operating temperature range of 0 to 55 °C, unless otherwise stated, and after a
45 minute warm-up period. The specifications include measurement uncertainty.
Data represented in this document are specifications unless otherwise noted.
Typical (typ):
Typical (typ) describes additional product performance
information that is not covered by the product warranty. It is performance beyond
specifications that 80 percent of the units exhibit with a 95 percent confidence
level at room temperature (approximately 25 °C). Typical performance does not
include measurement uncertainty.
Nominal (nom) or measured (meas):
Nominal (nom) or measured (meas)
describes a performance attribute that is by design or measured during the design
phase for the purpose of communicating sampled, mean or average performance,
such as the 50 ohm connector or amplitude drift vs. time. This data is not
warranted and is measured at room temperature (approximately 25 °C).