Atec Agilent-N5173B - Manual (Page 3)

3
Frequency Specifications
Range
Frequency range Option 513 9 kHz to 13 GHz
Option 520 9 kHz to 20 GHz
Option 532 9 kHz to 31.8 GHz
Option 540 9 kHz to 40 GHz
Resolution 0.001 Hz (nom)
Phase offset Adjustable in nominal 0.1° increments
Frequency switching speed 1 () = typical
Standard Option UNZ 2, 4
Option UZ2, 3, 4
CW mode
SCPI mode
(≤ 5 ms) ≤ 1.15 ms (≤ 750 µs) < 1.65 ms (1 ms)
List/step sweep mode (≤ 5 ms) ≤ 900 µs (≤ 600 µs) < 1.4 ms (850 µs)
1. Time from receipt of SCPI command or trigger signal to within 0.1 ppm of final frequency or within 100 Hz, whichever is greater.
2. For export control purposes CW switching speed to within 0.05% of final frequency is 190 us (meas).
3. For export control purposes CW switching speed to within 0.05% of final frequency is > 400 us (nom) below 20 GHz and > 600 us (nom) above 20 GHz.
4. Specifications apply when status register updates are off.